How to Find And Fix Problems With Wireless Mouse? – 4 Main Problem
Find And Fix Problems With Wireless Mouse – By that time, everything is changing, and new developments in technology have changed our behavior in recent years.
A few years back, we used to work with a bowl mouse with three buttons. After that, we switched the bold mouse with the laser mouse. And after that, laser Mouse packed with Bluetooth technology took over the whole market.
Nowadays, most of us are using wireless mouse and keyboards which do not require any wire to connect with any computer or laptop.
At first glance, you might think that technology is very simple where you attach a power source and Bluetooth to one mouse, and your simple mouse is now a wireless mouse.
But that is not the whole story. Multiple technologies are working together to make your mouse a wireless mouse and save from the mess of wires.
Just like any other technical equipment, your wireless mouse also has a few problems, which we are going to discuss today. So let’s find and fix problems with the wireless Mouse.
The Wireless Mouse is not turning on
One of the major things after buying a wireless mouse that can come is your mouse might not turn on.
If you are not able to turn on your mic, there is no chance that you will be able to connect it with your computer or laptop and later use it.
Your wireless mouse not turning on can happen because of multiple reasons.
First of all, you should check whether the battery in your wireless mouse is active or not. If you are not using your wireless mouse for a longer period, there is a high probability that the battery in your mouse is dead.
Many times wireless Mouse do not come with a good battery, and a bad battery can die Earlier than you expect.
Even after changing the battery, if you are not able to turn your wireless mouse on, then you should check the pins connecting the battery to your wireless mouse.
Are those pins connecting properly and attached to the mouse or not? If you have broken any pain, then kindly try to either repair or buy a new mouse because, without that pin, you will not be able to turn your wireless mouse on and connect it with your computer.
If your battery is new and it is connected perfectly with the mouse, then there is a high probability that Your wireless mouse is completely broken.
Wireless mouse not connecting to windows.
Another major problem that most of us face is that your wireless mouse is not connecting to Windows or any other operating system.
This problem can happen due to multiple reasons starting from your laptop, Wireless mouse receiver, and wireless mouse itself.
Let’s take a look at all the possible fixes for the wireless mouse not connecting to windows.
Before you do anything else to fix your wireless mouse not connecting to windows, you should try to add a new battery to your wireless mouse.
There is a high probability that your wireless mouse battery is low, and now it is not powerful enough to stay connected or make a connection.
Most of the time, changing batteries does the trick, and you don’t have to do anything else to fix your wireless mouse not connecting to Windows or any other operating system.
Even after changing the battery, if you are not able to connect your wireless mouse with your windows, then you should check the USB dongle, which is known as a nano receiver.
Kindly remove the USB dongle and put it in a different USB port, and give a few seconds to your operating system. After that, try it again.
Still, if you are not able to fix your wireless mouse not connecting to windows, you should check the drivers of your wireless mouse and try to reinstall or update whatever is available.
Do you know what the fix for all technical problems is? Restart. You should restart your computer and your wireless mouse at the same time and try connecting it again.
Last but not least, kindly try your wireless mouse on a different computer or laptop. Usually, it is the last resort that experts suggest.
Usually, a problem of the wireless mouse not connecting to your Windows or Mac operating system gets resolved till now, but if you are still not able to connect it, then you should update your operating system, whether it’s windows or Mac.
Mouse cursor behaving oddly
Let’s switch to some minor problems of wireless mouse, which is that your wireless mouse cursor is behaving very oddly.
You might encounter the pointer or cursor of your wireless mouse is constantly shaking over it is not as responsive as it used to be, and you have not changed any settings whatsoever related to your operating system.
Even though there is a setting where you can increase the sensitivity of your pointer using your operating system, we will not go into that because that is going to be very foolish. You have not changed any setting related to your wireless mouse on your operating system, so we don’t want to change the sensitivity.
Before you do anything else, I will suggest you check the surface of your mouse or mouse pad. If there is any dent or something too bright on the surface of your mouse, then there is a high probability that your wireless mouse will start behaving oddly.
The second thing you can do is clean the lens below your wireless mouse. As soon as you turn or lift your wireless mouse, you see a red light coming from the center of your mouse.
You can use a small cloth or cotton to clean the lens and try it once again.
Apart from all that, you should update or reinstall the drivers of your wireless mouse. Many times corrupted drivers can cause mouse cursors to behave oddly.
As you are already aware most of the problems with any wireless mouse start from the battery itself. Similarly, if the pointer or cursor of your wireless mouse is constantly shaking or it is not responding at all, then you should check the battery of your wireless mouse.
Not able to click your wireless mouse
Apart from the above-given problems, you may also encounter that you are not able to click your wireless mouse.
Because a wireless mouse can go away from your computer or laptop, there is a high probability due to multiple reasons you are not able to Either right-click or left-click your mouse.
If you have anyone else in your house, which can use your computer or laptop along with the wireless mouse, then there is a high probability that they have dropped something on the wireless mouse knowingly or unknowingly.
For example, if your children drop something on your wireless mouse while eating and watching a video, then there is a high probability that food will stick to the buttons, and it will not allow you to click.
Anytime you encounter anything like a mouse not allowing you to either click or right-click, you should open it as soon as possible and try to clean it.
Apart from that, if you drop something heavy on your wireless mouse, it might break the buttons. Because most wireless mouse are made out of plastic, there is a probability that they can break with extra pressure.
You should try to shake your mouth and listen if it sounds physically broken.
A wireless mouse has become a necessity these days. Most of us travel while carrying our laptops, and you cannot rely on a mouse and keyboard with wire.
You don’t know when you can fall in trouble. That is why you should learn how to Find And Fix Problems With Wireless Mouse.
You can encounter multiple problems, such as your mouse not responding, which can happen due to multiple reasons starting from the battery in your wireless mouse being completely dead.
Other than that, you might not be able to connect your wireless mouse with your computer or laptop, and it also has a different fix.
Can I use different receivers on different wireless Mouse?
Yes, you can use different receiver owners and different wireless Mouse but make sure that you are using the same model from the same company. Many times due to different versions of Bluetooth or wireless, you might not be able to connect with different receivers.
Can I reset my wireless mouse?
Yes, you can reset your wireless mouse. Every mouse comes with a reset pattern which is usually written on the user manual. Generally, you have to turn off your mouse and press both left and right-clicked at the same time while turning it on.